For safety reasons, acids and bases must be stored in safety cabinets in order to prevent any risk of leaks or breakage of bottles.
You must also pay attention that different product families must be separated in compartments or stored into different cabinets. Some of our cabinets are divided in compartments, allowing storage of different chemical families.
This catalogue presents our range of safety cabinets for several corrosives solutions of storage. Whatever your field of activity may be (laboratory, industry, warehouse, production unit,…), if you store corrosives (little to extremely corrosives), you must store them in safety cabinets. Do not hesitate to contact us for a personal and rapid advice.
Two different types of storage can be proposed concerning corrosives:
A forced ventilation is a prerequisite in order to improve the life cycle and the safety of a steel cabinet. Indeed, despite the fact that the steel is protected by a resistant epoxy paint, nothing can protect against the possibility of corrosion inside a steel safety cabinet. Moreover, to protect the users health, it is highly recommended to install an exhausting system, whatever the material used for the cabinet, in order to avoid any concentration of dangerous vapors inside the cabinet. We invite you to have a look at the different vent solutions proposed (fan, exhausting system, filtration by active coal, etc…) at the end of this catalogue to find the best solution for your needs. Do not hesitate to contact us for any information.
Offers worldwide industrial and commercial product certification and testing services through its business unit FM Approvals. Recognized and respected across the globe, FM Approvals certification insures customers that a product or service has been objectively tested and complies to the highest national and international standards.
It is applicable for storage of flammable and highly flammable chemicals in a laboratory. The flammables used in laboratories must be stored in one or several safety cabinets which are fire resistant 15 (minimum required), 30, 60 or 90 minutes.
The standard indicate on the ventilation and filtration efficiency, as well as the Containment efficiency for the recirculatory fume hood designed for chemicals use in laboratories.